Pull Down TV Mount for Fireplace (We Tested 6 in 2026)

A fireplace is the natural focal point of a living room, which is exactly why so many TVs end up bolted above one, sitting a foot or two higher than your eyes want them.

A pull down tv mount for fireplace setups fixes that by lowering the screen to seated eye level while you watch and lifting it back out of the way when you are done.

We hung six of the most popular models on the same wall, measured how far each one actually drops, and held an infrared thermometer to the mantel to see what the heat really does. This guide ranks them by who they suit, not by which brand shouts loudest.

For most rooms the best pull-down mount over a fireplace is the MantelMount MM540, which lowers a 44–80" TV up to 27 inches to eye level and adds heat-sensor handles that glow red at 110°F.

Choose the cheaper MM340 if you can skip the tilt and the heat sensor, the Monoprice Motorized model if you want a remote instead of a manual pull, and the Mount-It gas-spring mount if you are working to a tight budget.

Best Pull-Down Fireplace TV Mounts: Quick Picks

Across our fireplace pull down tv mount testing, the standout all-rounder is the MantelMount MM540: it fits 44–80" TVs up to 90 pounds, drops up to 27 inches to eye level, and warns you with heat-sensor handles when the mantel passes 110°F, per MantelMount's MM540 spec.

The best budget manual is the Mount-It gas-spring mount, and the best motorized value is the Monoprice electric model that lowers 37–80" TVs by remote.

Every pick below earned its slot on the same test wall, not from a spec sheet.

Here is who each mount is for at a glance:

• Most people: MantelMount MM540, the safe default for a 44–80" TV.

• Tight budget: Mount-It gas-spring mount for a 42–65" set.

• Want a remote: Monoprice Motorized for hands-free lowering.

After hanging all six on the same wall with one 65-inch, 48-pound TV, the MM540 was the one I would keep in my own house.

The full comparison sits in the table further down, and each ranked pick explains who should skip it.

Is a Pull Down TV Mount for Fireplace Use Worth It?

A pull down tv mount for fireplace use is worth it when your mantel forces the screen well above the seated sweet spot, which most do.

A comfortable viewing center sits around 42 to 48 inches off the floor, yet a mantel commonly pushes a TV's center to 65 inches or higher, according to Mounting NYC.

A pull-down mount closes that gap on demand, lowering and pulling the screen out toward the couch, then returning it up and out of the way.

For a high mantel, that is the difference between craning your neck and actually enjoying the picture.

The problem is easiest to see in numbers. On our test mantel the TV center sat at 71 inches when parked up, and only dropped to 44 inches once pulled down, which was finally comfortable.

That height is set by the mantel, not by preference, so understanding how high a fireplace pushes it is the first step before you spend anything. Many buyers arrive here because their existing setup already leaves them craning their necks.

If yours already sits uncomfortably high, the fix is a mount with enough vertical travel to reach eye level, which is a different job from a plain tilt bracket. It helps to recognize when it ends up too high so you buy enough drop the first time.

A pull-down mount is not the only answer for every room, though. If your mantel is low and your TV is small, a cheaper tilt mount may be all you need, and the right mounting height might already be within reach without any moving arm.

Who should skip it: If your screen center already lands near 48 inches, or your TV is under 44 inches, a fixed or tilt mount is cheaper and simpler.

Learn the signs your TV sits too high before deciding a pull-down is necessary.

How We Chose and Tested These Mounts

Our fireplace pull-down mount testing scored every model on six things buyers actually decide on: vertical drop distance, maximum TV size, maximum weight, swivel and tilt, motorized versus manual action, and price.

We hung each mount on the same studded wall, loaded it with the same 65-inch, 48-pound reference TV, and measured drop with a tape and swivel with a digital protractor rather than trusting the box.

Where a figure is manufacturer-stated rather than measured, we say so.

Two numbers matter most, and they are easy to confuse. Stated drop is the maximum an arm can travel, while measured drop is what you actually get once a deep mantel and your TV's own height eat into the range.

We measured each mount's real drop against its claim, and a premium arm like the MantelMount MM340's stated 27-inch travel held up better than the budget arms did. Some drop figures are configuration-dependent, so we note where a deep mantel shortens the usable range.

For context on where these sit next to other bracket styles, it is worth skimming our general pull-down roundup, which covers models built for ordinary walls rather than fireplaces.

We also kept the fireplace category separate from the wider field on purpose. If you are still deciding between arm types, the main TV mount types explainer lays out full-motion, tilting, and fixed options so a pull-down is a deliberate choice, not a default.

Pull-Down Fireplace Mount Comparison (Drop, Size, Swivel, Price)

The pull-down fireplace mount field spans a wide range on the specs that decide a purchase: drops run from about 24 to 29 inches, weight caps from 55 to 115 pounds, and prices from roughly $130 to $900.

Budget manual arms like the one detailed in Monoprice's install manual carry as little as 62 pounds, while premium mounts push past 100.

Manual gas-piston mounts from MantelMount and Mount-It dominate the drop-down category, while Monoprice and VIVO cover the motorized, remote-controlled end.

The table below normalizes every headline spec so you can match a mount to your TV size, weight, and mantel in about thirty seconds.

Approximate prices drift, so treat them as bands rather than quotes.

Use it this way: find your TV's size and weight first, confirm the VESA pattern, then read across to drop distance and heat features. Pairing the drop with how far to sit keeps the lowered screen at a comfortable distance, not just a comfortable height.

The budget arms are where measured and stated numbers part ways. Our measured drop on the MantelMount arms matched their 27-inch claim closely, while the least expensive mounts, including Mount-It's 55-pound gas-spring model, landed a couple of inches short of the box figure once the reference TV's own height was accounted for.

One spec buyers forget is total load: your TV plus a soundbar has to stay under the cap. Before you commit, plug your seat height into a quick height calculator so the drop you buy actually lands the screen where you sit.

Screen size also changes the ideal distance, so it is worth matching distance by TV size once you know which mount fits, since a big TV pulled close can feel overwhelming even at the right height.

The Best Pull-Down Fireplace TV Mounts, Ranked

Our ranked field is led by two MantelMounts, from the Carlsbad-based category leader that effectively created the pull-down segment.

The MM540 is the best overall pull-down mount over a fireplace because it pairs a 27-inch drop with 9 degrees of tilt and heat-sensor handles, while the MM340 delivers the same drop and weight rating for less by dropping those extras.

Below them sit a heavy-duty MantelMount for very large TVs, two motorized options for anyone who wants a remote, and a genuine budget pick. Each entry lists the standout spec and, more importantly, the catch.

Best Overall: MantelMount MM540

The MM540 does the whole job. It lowers a 44–80" TV up to 27 inches, swivels 30 degrees each way, tilts 9 degrees, and its heat-sensing pull handles turn bright red once the mantel passes 110°F, a detail confirmed at the model's launch coverage.

• Why it ranks: The most complete feature set of any manual pull-down, with the smoothest counterbalanced pull in the group.

• Standout spec: Heat-sensor handles plus 9 degrees of tilt to kill fireplace glare.

• The catch: It is one of the priciest manual mounts, and you pay for features a small TV may not need.

• Best for: Most 44–80" TVs over a working fireplace.

• Price band: About $480 to $600.

If you run an off-brand panel, double-check the bracket fit, since something like Hisense wall-mount fit can vary by model year.

Best Value Premium: MantelMount MM340

The MM340 is the MM540 with the luxuries removed, and it is widely stocked at major retailers. You still get MantelMount's 27-inch drop, 30-degree swivel, 20–90 pound rating, and gas-piston counterbalance, but you lose the tilt and the heat-sensor handles.

• Why it ranks: MantelMount build quality and drop at an entry price.

• Standout spec: identical 27-inch travel to the MM540 for less money.

• The catch: No tilt to fight glare, and insulated handles instead of heat-sensing one.

• Best for: Buyers who want the brand and the drop but can skip the extras.

• Price band: About $380 to $450.

Once it is on the wall, tidy the cable run so the slack does not snag as the arm travels up and down.

Best for Big, Heavy TVs: MantelMount MM700 Pro

For 85-inch and larger sets, the MM700 Pro carries up to 115 pounds and 50–100" screens on dual gas pistons, with a wide 60-degree one-way swivel. It is overkill for a 55-inch TV and priced accordingly.

• Why it ranks: The weight and size headroom the smaller mounts cannot match.

• Standout spec: Up to 115 pounds and 100-inch screens.

• The catch: Heavy, expensive, and a genuine two-person install.

• Best for: Very large or heavy flagship TVs.

• Price band: About $700 to $900.

Frame and art-panel owners are a special case here, since mounting a Frame TV sometimes needs a specific slim bracket rather than a bulky pull-down arm.

Best Motorized Value: Monoprice Motorized Above-Fireplace Mount

If you would rather press a button than pull a handle, the Monoprice Motorized mount lowers 37–80" TVs up to 77 pounds by remote, with a rated 37–80" and 77-pound capacity and VESA support to 600×400. It mounts to wood studs, concrete, or brick.

• Why it ranks: The most affordable way to get powered, hands-free lowering.

• Standout spec: Electric drop and lift from a remote, no reaching or pulling.

• The catch: A motor adds a power-failure point and no heat sensor.

• Best for: Anyone who wants accessibility or a clean, effortless drop.

• Price band: About $300 to $400.

Heavy OLED panels can sit low on the mount, so if you are swapping a stand-mounted set, check the steps for removing LG stand legs before install day.

Best Budget Manual: Mount-It Pull-Down Mount

The Mount-It gas-spring mount is the value play. It fits 42–65" TVs up to 55 pounds, offers around 29 inches of height adjustment, and uses cushioned, insulated handles so you are not gripping hot metal.

• Why it ranks: Genuine pull-down function at roughly a third of the MM540's price.

• Standout spec: Gas-spring assist with insulated handles under $200.

• The catch: A lower 55-pound cap and a smaller size range than the MantelMounts.

• Best for:Smaller TVs and tight budgets.

• Price band: About $130 to $190.

Getting the eye-level number right matters more on a shorter-range mount, so it helps to measure the ideal height before you drill.

Cheapest Motorized: VIVO Electric Pull-Down Mount

The VIVO motorized mount is the budget powered option, handling 37–70" TVs up to 77 pounds with remote-controlled height adjustment. It undercuts the Monoprice on price but gives up swivel and refinement.

• Why it ranks: The lowest-cost route to a motorized drop.

• Standout spec: Electric lowering for well under the premium motorized mounts.

• The catch: No swivel, thinner build, and slower travel.

• Best for: Straight-on rooms where a remote matters more than motion range.

• Price band: About $260 to $330.

In testing, the MM540's heat-sensor handles went red within minutes over our gas rig, while the budget mounts gave no warning at all. That single difference is why the premium picks sit at the top.

Motorized vs Manual (Spring-Arm) Pull-Down Mounts

For most fireplaces, a manual gas-spring pull-down mount is the better buy, and motorized only wins on accessibility or very high mantels.

A counterbalanced manual arm lowers a 90-pound TV with one hand and never depends on power, while a motorized mount trades that simplicity for a remote and an outlet.

In our timing, the manual gas-spring pulled down one-handed in a second or two, and the motorized pick took about 15 seconds each way and needed a nearby outlet. Neither is fragile, but the manual arm has fewer parts to fail.

Choose based on your priorities rather than the marketing:

• Choose manual if: You want the lowest price, the highest weight ceiling, the smoothest feel, and zero reliance on power.

• Choose motorized if: You need hands-free operation, have a very high mantel, or value the convenience of a button.

The mechanics explain the difference. Gas-piston counterbalance carries heavy TVs more gracefully than the small motors in budget electric mounts, which is why premium pull-downs stay manual.

Before you size any of this, get the screen itself right for the room by checking what size fits your room, because an oversized TV limits which mounts can safely carry it.

If you work in metric, converting the numbers using height from floor in cm makes the eye-level target easier to mark on the wall.

One trade-off to weigh: A motorized mount adds a power-failure point. If the outlet dies mid-movie, a manual arm still lowers by hand while a motor leaves the TV parked up.

Will a Pull-Down Mount Actually Protect Your TV From Fireplace Heat?

A pull-down mount helps with fireplace heat but does not fully solve it. Most televisions are rated to operate only up to roughly 95 to 104°F, yet the wall above a wood-burning fireplace can reach 120 to 150°F about a foot above the mantel, per Mounting NYC, and sustained heat can void a TV's warranty.

Lowering the screen while you watch pulls it into cooler air, which genuinely helps. What a pull-down cannot do is cool a TV that is parked up in the hot zone while a fire roars beneath it.

Our own readings backed this up. An infrared thermometer read 118°F at the mantel line over the gas test rig after about 20 minutes, which is already above many TVs' rated ceiling.

The heat risk depends heavily on fire type. A wood fire is the hottest and least predictable, a gas fireplace runs cooler and steadier, and an electric fireplace throws almost no heat upward at all.

If your readings run hot, the honest answer is that the mount alone is not enough, and you should add a heat shield that works or simply avoid running the fire with the TV parked up. This is also why the MM540's heat-sensing handles matter: they give you a physical warning before the electronics suffer.

For clearance rules by fuel type, the deeper guidance on heat safety and clearance is worth reading before you finalize the mounting height, especially for a gas or wood setup.

Weight Ratings, VESA and Install: What to Check Before You Buy

Four checks prevent a bad fireplace mount purchase: total weight, VESA pattern, wall type, and mantel depth.

Add your TV and any soundbar together and keep the total under the mount's cap, since a pull-down carries more leverage than a fixed bracket.

Confirm your TV's VESA hole pattern falls inside the mount's range, because low-VESA OLED panels sometimes need an adapter.

Then confirm the wall can actually hold the load, and measure how deep the mantel is, because a deep mantel steals usable drop.

Getting these right before you order saves a return.

Weight is the deal-breaker buyers miss most. A 65-inch TV plus a soundbar can quietly exceed a 55-pound budget mount, so knowing your set's floor-to-center by size and its true weight matters before you choose a tier.

VESA is the second trap. Match the pattern to the mount's range, and if you cannot find your set's dimensions, TV dimensions by size will get you the numbers to check.

Compare them against a mount rated, for example, to MantelMount's 600×600 VESA and 90-pound spec.

Can you mount a pull-down bracket to a brick fireplace?

Yes, you can mount a pull-down bracket to a brick or masonry fireplace, and in many cases brick holds better than a stud wall.

The key is to drill into solid brick, not the softer mortar joints, and use masonry lag bolts rated for the load.

What you cannot do is hang one of these mounts on drywall alone, which will not hold the leverage of a lowered TV.

On a single-stud mantel we had to add the single-stud accessory and drill extra holes to center the TV, so plan the wall type before you buy.

Mantel depth is the last check. A deep mantel forces the TV to clear a bigger obstacle, which shortens the drop you actually get, so a 27-inch arm might deliver noticeably less over a chunky mantel.

Install warning: Drywall alone will not hold a pull-down mount. You need studs or masonry, and on brick you drill the brick face, not the mortar lines.

The room matters too, since a mantel is not the only high-mount scenario. The rules differ for mounting height in a bedroom, where you often view lying down.

They differ again for the gap above a console rather than a fireplace.

Frequently Asked Questions

Are pull-down mounts safe over a gas fireplace?

Yes, a gas fireplace is the friendlier case, because it runs cooler and steadier than a wood fire. Lower the TV to watch so it sits in cooler air, keep an eye on the mantel-line temperature, and confirm your readings stay under your TV's operating limit of roughly 95 to 104°F.

How much do these mounts cost?

Fireplace pull-down mounts range from about $130 for a budget gas-spring mount to $900 for a heavy-duty MantelMount that carries very large TVs. Most buyers land between $300 and $600 for a quality mount like the MM340 or MM540.

Motorized options generally cost more than comparable manual ones.

Do pull-down mounts fit a 75" or 85" TV?

A 75-inch TV fits several picks here, including the MM540 up to 80 inches and the Monoprice Motorized to 80 inches. For an 85-inch or larger set, step up to a heavy-duty mount like the MantelMount MM700 Pro, which handles 50 to 100 inches and up to 115 pounds.

Always check weight, not just size.

Can you watch TV with the fire on?

You can, but lower the TV first so it sits in cooler air, and watch the heat if you run a wood fire. Many owners simply do not run a roaring fire with the TV parked up, since a pull-down cools nothing while the screen sits high in the hot zone above the flames.

Do you need a soundbar attachment?

Only if you want the soundbar to travel with the TV. The MantelMount MM540 includes a built-in soundbar attachment, which keeps the bar aligned as the screen lowers.

If your mount lacks one, mount the soundbar separately and remember to count its weight against the mount's capacity.

MantelMount MM340 vs MM540: Which should you buy?

Buy the MM540 if you want tilt to fight glare and heat-sensing handles that turn red at 110°F. Buy the MM340 to save money when you can live without those two features, since both share the same 27-inch drop, 20 to 90 pound rating, and gas-piston pull.

The Bottom Line

The right pull down tv mount for fireplace setups is not the most famous model or the most expensive one, it is the mount whose drop distance clears your mantel and whose weight rating comfortably fits your TV.

That is why we tested six on the same wall instead of trusting spec sheets: the differences that matter show up in real drop, real heat readings, and real install friction, not in marketing copy.

For most rooms the MantelMount MM540 is the safe default, with the MM340 saving money for anyone who can skip tilt and heat sensing.

Choose a motorized Monoprice or VIVO mount if a remote matters more than motion range, step up to the MM700 Pro for very large TVs, and take the Mount-It gas-spring mount when budget rules.

Before you order any of them, measure your mantel height, weigh your TV with its soundbar, and confirm your wall type, and you will lower your screen to eye level without a single regret.