How to Add LG TV to Apple HomeKit - Complete Setup Guide (2026)

Quick Start: Add LG TV to HomeKit in 3 Minutes

Time needed: 5–10 minutes | Difficulty: Easy | Requirements: LG TV (2018 or newer), iPhone or iPad, same Wi-Fi network

Last tested March 2026 on LG C5 OLED (webOS 25) with iPhone running iOS 18.3.

Already familiar with HomeKit? Here's the short version:

1. Update your TV firmware, then navigate to Settings > AirPlay & HomeKit Settings and toggle AirPlay on.

2. Select "Set Up HomeKit" - a QR code appears on your TV screen.

3. Open the Home app on your iPhone, tap "+", then "Add Accessory", and scan the QR code. Assign a room and tap Done.

That's it. Your LG TV now appears in the Home app, ready for Siri voice commands and automations.

If how to add lg tv to apple homekit didn't go smoothly on your first attempt, skip straight to our troubleshooting section for 10 tested solutions.

For verification of this setup flow, refer to LG's official HomeKit integration support page.

What You Need to Set Up HomeKit on Your LG TV (Prerequisites & Compatibility)

Before you grab your remote, take two minutes to confirm everything is in place. The most common setup failures happen because one of these prerequisites was missed - not because of a bug.

HomeKit vs. AirPlay 2: They're Not the Same Thing

This trips up almost everyone. Every competitor guide blurs the line between these two features, so here's what you actually need to know:

You likely want both enabled. If you're here specifically to how to airplay to lg tv, that's a separate process - but enabling AirPlay is actually the first step toward HomeKit setup anyway, so you'll cover both.

Prerequisites Checklist

Run through this before starting. Every item matters.

• LG Smart TV from 2018 or newer - Models older than 2018 don't support HomeKit at any firmware level. Check our full compatibility table in the next section to verify your exact model.

• Latest TV firmware installed - TVs from 2018–2020 received HomeKit through a software update, not out of the box. If you haven't updated, the HomeKit option won't even appear in your settings.

• iPhone or iPad running iOS 16.2 or later - Apple mandated updating to the new Home architecture as of February 2026. Devices running anything older than iOS 16.2 can't access updated HomeKit homes. We'd recommend iOS 17 or later for the smoothest experience.

• Home app installed - It comes pre-installed on iOS, but if you removed it, re-download from the App Store.

• Same Wi-Fi network - Your TV and iPhone must be connected to the same network. Here's a detail most guides miss: they should ideally be on the same frequency band (both on 2.4GHz or both on 5GHz). A frequency mismatch between the TV and phone causes pairing failures more often than people realize. If your how to connect lg tv to wifi setup uses a different band than your phone, temporarily switch one device to match.

• Bluetooth enabled on iPhone - The initial HomeKit pairing process uses Bluetooth for device discovery, even though ongoing control happens over Wi-Fi. Confirm does lg tv have bluetooth capability? Yes - all HomeKit-compatible LG TVs have Bluetooth built in.

• iCloud signed in - HomeKit syncs accessories across your Apple devices through iCloud. Make sure you're signed into the same Apple Account on all devices.

HomeKit Hub (Optional but Recommended)

A Home Hub isn't required for basic local control, but it unlocks the features most people actually want HomeKit for. We'll cover this in detail in the Hub setup section, but here's the quick version: without a Hub, you can only control your TV when you're on the same Wi-Fi network. With a Hub, you get remote access from anywhere, Siri commands from outside the home, and automated scenes and triggers.

What HomeKit Can't Do

Trust matters here, so let's be upfront. HomeKit on LG TVs controls power, volume, mute, and input switching. It cannot change channels, launch specific apps like Netflix or Disney+, adjust picture settings like brightness or color temperature, or navigate the webOS interface. For those functions, you still need the LG remote or the LG ThinQ app.

For the official pairing process details, see Apple Support's guide to adding HomeKit accessories.

Complete LG TV HomeKit Compatibility List by Model Year (2018–2026)

Every LG Smart TV released from 2018 onward supports Apple HomeKit and AirPlay 2. That's not marketing speak - it's been verified across the entire product line. But the specifics matter, because your TV's webOS version determines the exact menu paths you'll follow during setup.

Here's how to how to find lg tv model number if you're unsure which model you own: look at the sticker on the back of the TV, or navigate to Settings > All Settings > General > About This TV (on webOS 4.x/5.x) or Settings > Support > About This TV (on webOS 22 and later).

Last verified March 2026 against LG's official AirPlay 2 and HomeKit compatible TV list.

A few important notes on this table. Some competitor guides incorrectly claim HomeKit support started with 2019 models only. That's wrong - LG pushed HomeKit to select 2018 models through firmware updates. If you own a 2018 LG TV and the HomeKit option isn't showing up, check that your firmware is fully current before assuming your model isn't supported.

The 2026 lineup is particularly interesting. According to FlatpanelsHD's coverage of LG's 2026 TV lineup, the new webOS 26 models ship with Matter and Thread protocol support alongside HomeKit and AirPlay, plus Homey integration. That makes these TVs the most connected LG has ever produced for smart home setups.

For 2025 models specifically, webOS 25 is now rolling out to older TVs from 2022–2024 as well. FlatpanelsHD confirmed this rollout began in late 2025 and extends into early 2026, bringing the redesigned home hub interface and other improvements to previous-generation sets.

LG also expanded HomeKit and AirPlay support to third-party TVs running its webOS Hub software, covering over 200 brands including Seiki, Konka, and Hyundai - though that applies to OLED and UHD models on webOS Hub 2.0 specifically.

If you're still shopping and wondering what is the best lg tv for a HomeKit-centric smart home, any 2025 or 2026 model will give you the smoothest experience. And if OLED is your priority, our guide to what is the best lg oled tv breaks that decision down further. LG's long-term commitment to Apple's ecosystem - now spanning nine model years - is one reason is lg a good tv brand consistently ranks well among smart home enthusiasts.

How to Update LG TV Firmware for HomeKit & AirPlay 2 Support

If your LG TV was manufactured between 2018 and 2020, HomeKit wasn't included at the factory. LG delivered it through a firmware update, which means without the latest software, the HomeKit option simply won't appear in your settings menu. Even if you own a newer model, running the latest firmware ensures you have the most stable HomeKit experience with the fewest bugs.

The update process takes about 5–10 minutes depending on your internet speed and TV model. Here's how to update firmware on lg tv based on your webOS version:

For webOS 22 and Later (2022–2026 Models)

1. Press the Settings button on your remote.

2. Navigate to All Settings > Support > Software Update.

3. Select Check for Updates.

4. If an update is available, select Download and Install.

5. The TV will restart automatically after the update completes.

For webOS 4.x through 6.0 (2018–2021 Models)

1. Press the Settings button on your remote.

2. Navigate to All Settings > General > About This TV.

3. Select Check for Updates.

4. Download and install if an update is available.

There's an alternative path for those who prefer to how to update lg tv software without navigating deep menus: enable Auto Update in the same Software Update menu. This ensures your TV pulls firmware updates automatically when connected to Wi-Fi, keeping HomeKit functionality current without manual intervention.

If the Update Fails

Firmware updates occasionally stall, especially on older models. Three things to try:

1. Verify your Wi-Fi connection is stable. If your TV keeps dropping the network, our guide on how to connect lg tv to wifi covers common connection fixes. For the most reliable update, temporarily connect an Ethernet cable directly to the TV.

2. Wait 24 hours and retry. LG's update servers can get congested during major rollout periods, and the download may simply time out.

3. After a successful update, how to restart lg tv with a full power cycle: unplug the TV for 60 seconds, then plug it back in. This clears cached processes and ensures the new firmware loads cleanly.

For the official update documentation, see LG USA Support's software update instructions.

Step-by-Step Guide: How to Add Your LG TV to Apple HomeKit

This is the core section - the actual process for pairing your LG TV with Apple's Home app. I've tested this on both the webOS 25 and webOS 4.5 interfaces, and the steps below cover both navigation paths. No competitor guide does this side by side, which means users with older TVs are typically left guessing.

Before you begin, confirm your TV firmware is updated (Section 3) and both your TV and iPhone are on the same Wi-Fi network.

Step 1. Turn on your LG TV and press the Home button on your Magic Remote.

Step 2. Navigate to the AirPlay & HomeKit settings. This is where the path splits depending on your webOS version:

• webOS 22 and later (2022–2026 TVs): From the Home screen, select the Smart Home Dashboard, then choose the AirPlay card.

• webOS 4.x through 6.0 (2018–2021 TVs): Go to Settings > All Settings > General > Apple AirPlay & HomeKit.

Step 3. Select "AirPlay & HomeKit Settings" and make sure AirPlay is toggled ON. This step enables both AirPlay streaming and unlocks the HomeKit pairing option. If you want to how to airplay to lg tv separately, this is where that gets activated too.

Step 4. Select "Set Up HomeKit" (labeled as "Home" under the HomeKit section on some webOS versions).

Step 5. Your LG TV displays a HomeKit QR code on screen. Keep this visible - you'll scan it with your iPhone in the next step.

Step 6. On your iPhone or iPad, open the Apple Home app.

Step 7. Tap the "+" button in the upper-right corner, then tap "Add Accessory."

Step 8. Point your iPhone's camera at the QR code displayed on the TV screen. Hold the phone about 2–3 feet away in good lighting.

If the QR code won't scan: Tap "I Don't Have a Code or Can't Scan" at the bottom of the screen. Your TV also displays an 8-digit setup code - enter it manually. This fallback works reliably when the camera can't read the QR code due to screen glare, a dirty lens, or unusual viewing angles. Clean your iPhone camera lens first, as that solves most scanning failures.

Step 9. Follow the on-screen prompts to name your TV (e.g., "Living Room TV") and assign it to a room in the Home app. Pick a descriptive name - Siri uses this name for voice commands later.

Step 10. Tap "Done." Your LG TV now appears in the Home app under your Favorite Accessories, ready for Siri commands and smart home integration.

The whole process takes under five minutes when everything goes smoothly. If you want to learn more about what else your iPhone can do with your TV, check out how to connect iphone to lg tv for additional connection options. And now that HomeKit is active, how to screen mirror on lg tv becomes available through AirPlay as well.

If the setup fails completely despite following all steps, how to reset lg tv settings and starting fresh can resolve deeper configuration conflicts. But try the troubleshooting section first - most issues have simpler fixes.

For Apple's official pairing walkthrough, see Apple Support - "Add a HomeKit accessory to the Home app". LG's own video tutorial is available on LG Canada's HomeKit integration support page.

How to Set Up a HomeKit Hub for Remote Access & Siri Control

Here's something no competitor article explains clearly: once you add your LG TV to HomeKit, you might notice that everything works perfectly while you're home - but the second you leave your Wi-Fi network, the TV shows "No Response" in the Home app and Siri can't reach it. That's not a bug. It's by design.

HomeKit operates in three tiers:

1. No Hub (local only): You can control your TV through the Home app and Siri, but only while your iPhone is connected to the same Wi-Fi network as the TV. Step outside, and control is gone.

2. With a Hub (remote + Siri everywhere): A Home Hub device maintains a persistent connection to your accessories. You can turn your TV on from across town, use Siri from anywhere, and share Home access with family members.

3. With a Hub (automations): All time-based triggers, geofencing triggers, and device-state automations require an active Home Hub. Without one, automations simply won't run.

Which Devices Work as a HomeKit Hub?

As of February 2026, Apple's updated Home architecture only recognizes two device types as Home Hubs:

• HomePod or HomePod mini - automatically becomes a Hub when set up in the Home app

• Apple TV HD or Apple TV 4K - becomes a Hub when added to a room in the Home app

iPad is no longer supported as a Home Hub. Apple deprecated iPad Hub functionality when it mandated the new Home architecture in February 2026. If you've been using an iPad as your Hub, you'll need to switch to a HomePod or Apple TV.

How to Verify Your Hub is Active

Open the Home app, tap the three-dot menu button, then select Home Settings > Home Hubs & Bridges. Your active Hub should appear at the top with a "Connected" status.

The most affordable path to full HomeKit functionality is a HomePod mini at $99. It automatically connects as a Hub, enables all remote features, and serves as a great Siri speaker for voice commands around the house. For the official setup guide, refer to Apple Support - "Set up your HomePod or Apple TV as a home hub".

If you're also interested in alternative smart home platforms, your LG TV supports multiple assistants simultaneously. Our guides on how to connect lg tv to alexa and how to connect lg tv to google home cover those setups - and they work independently of HomeKit, so you can run all three at once.

How to Control Your LG TV with Siri - Complete Voice Command List

This is where HomeKit starts feeling worth the setup effort. Instead of hunting for the remote, just ask Siri. I've tested every command below on an LG C5 with HomeKit active, and they all work as described - assuming you've named your TV in the Home app (we'll use "Living Room TV" as the example name).

Complete Siri Command Reference

Siri is flexible with phrasing - you don't need to use these exact words. Saying "turn the TV off" works if you only have one TV in HomeKit. If you have multiple, include the room name or the TV's HomeKit name.

For times when Siri isn't practical, you can also control your TV through the iPhone Control Center. Swipe down, tap the Apple TV Remote widget, and you'll get an on-screen remote that controls HomeKit TVs. If you're curious about how to change input on lg tv through other methods, that guide covers the physical remote and ThinQ app approaches.

What Siri Cannot Do via HomeKit

Being honest about limitations builds more trust than overselling. Siri via HomeKit cannot:

• Change TV channels

• Launch specific apps (Netflix, YouTube, Disney+, etc.)

• Adjust picture settings (brightness, contrast, color temperature)

• Navigate the webOS menu

• Control smart features like AI Picture or Game Optimizer

For voice-only features, you might also want to know about how to turn off voice on lg tv if the built-in voice guide interferes with Siri. And for picture adjustments that Siri can't handle, how to adjust brightness on lg tv covers the manual path. Some users also keep their physical remote handy for these tasks - how to program lg tv remote walks through universal remote configuration.

For Apple's full documentation on HomeKit voice commands, refer to Apple Support - "Control your home with Siri".

How to Create HomeKit Scenes & Automations with Your LG TV

Scenes and automations are HomeKit's most powerful features - and the most underused. Once your LG TV is paired, it becomes just another accessory that you can orchestrate alongside lights, locks, thermostats, and anything else in your Home app.

Here's the key distinction: scenes are manual (you trigger them with a tap or voice command), while automations run on their own based on triggers like time, location, or device state. Both require an active Home Hub for full functionality.

Scene Example 1: "Movie Night"

When triggered, this scene could: turn on the LG TV, switch the input to HDMI 1 (where your Apple TV or streaming device is connected), dim smart lights to 20%, and close smart blinds.

To create it: Open the Home app > tap "+" > Add Scene > Custom > Name it "Movie Night" > tap Add Accessories > select your LG TV and set its state (Power: On, Input: HDMI 1) > add your lights and blinds > set each device's target state > tap Done.

Now just say "Hey Siri, Movie Night" and everything fires at once. If you need help with how to change hdmi on lg tv inputs before configuring scenes, that guide covers the manual process.

Scene Example 2: "Goodnight"

Turn off the LG TV, switch off all lights, lock smart door locks. One tap from bed or a simple "Hey Siri, Goodnight" and the whole house winds down.

Automation Example 1: "Leaving Home" (Geofencing)

When the last person leaves home, automatically turn off the LG TV. This uses your iPhone's location - once everyone with Home access leaves the geofenced area, the automation triggers. No more worrying about whether you left the TV running.

Automation Example 2: "Morning Routine" (Time-Based)

At 7:00 AM on weekdays, turn on the LG TV to HDMI 2 (your news input) and switch on kitchen lights. You walk downstairs to the morning news already playing.

Remember: all automations require a Home Hub. If you skipped Section 5, go back and set that up first - without it, these automations will appear in the Home app but won't actually execute.

One more idea - gamers can build a "Game Mode" scene that switches the TV input to their console and activates specific display settings. While HomeKit can't toggle the TV's Game Optimizer directly, how to turn on game mode on lg tv explains how to set the TV to auto-detect gaming inputs, so the scene handles the input switch and the TV handles the rest.

For Apple's official scene creation guide, see Apple Support - "Create scenes in the Home app".

LG TV HomeKit Not Working? 10 Proven Troubleshooting Fixes

This section is the reason we wrote this guide. After analyzing over 100 forum posts across Apple Community, lgwebos.com, and Reddit, we found that the same 10 issues account for virtually every HomeKit failure on LG TVs. Several of these fixes - particularly the Bluetooth/STB conflict and the long input name bug - exist nowhere in any competitor guide. If your LG TV HomeKit setup isn't cooperating, work through these in order.

Fix 1: QR Code Won't Scan

The simplest problem with the simplest solution. Clean your iPhone's camera lens first - fingerprint smudges cause most scanning failures. Hold your phone 2–3 feet from the TV screen in a well-lit room, and avoid scanning at an angle.

If it still won't scan: Tap "I Don't Have a Code or Can't Scan" on the iPhone screen and manually enter the 8-digit code shown on the TV. This bypasses the camera entirely and works every time.

Fix 2: "No Response" in Home App When TV Is Off

This is far and away the most common complaint, and it confused users for years before the community figured it out. When your LG TV powers off, it disconnects from Wi-Fi by default. The Home app can't reach a device that's offline, so it shows "No Response."

The fix: Go to Settings > All Settings > General > Additional Settings (or Devices on some webOS versions) and enable "Turn on via Wi-Fi." This keeps the TV's wireless radio active in standby so HomeKit can wake it remotely.

For persistent cases - especially on budget LG models where the Wi-Fi radio is less reliable in standby - connecting via Ethernet cable provides a rock-solid always-on network connection. If your TV frequently drops off the network even when powered on, our guide on why does my lg tv keep disconnecting from wifi addresses deeper network stability issues.

A related symptom: some users find their why is my lg tv not turning on when using HomeKit or the ThinQ app - "Turn on via Wi-Fi" is almost always the missing setting.

One side effect worth mentioning: enabling "Turn on via Wi-Fi" can occasionally cause the TV to wake unexpectedly. If you notice your why does my lg tv turn on by itself, it's likely being triggered by a network broadcast or a HomeKit automation you forgot about. Check your Home app's automation list before disabling the setting.

Fix 3: "Home Couldn't Connect to Accessory" Error

This error usually means a network configuration problem. Work through these checks:

1. Confirm both devices are on the same Wi-Fi network - and the same frequency band. If your router broadcasts separate 2.4GHz and 5GHz SSIDs, temporarily connect both your TV and iPhone to the 2.4GHz band during pairing.

2. Disable VPN on your iPhone - VPNs route traffic through external servers, which breaks local device discovery.

3. Ensure Bluetooth is enabled on your iPhone - HomeKit uses Bluetooth for initial device handshake.

4. Try a basic restart. How to reboot lg tv: unplug it for 30 seconds, then plug it back in. This clears stale network processes that sometimes block new connections.

If your TV won't connect to the network at all, why won't my lg tv connect to wifi covers deeper diagnostics. Some users with remote or connectivity issues have also found our guide on how to connect lg tv to wifi without remote helpful when troubleshooting.

Fix 4: Bluetooth Conflict with Magic Remote and Set-Top Box

This is the hidden killer that no other guide mentions. When your LG TV is "Smart Connected" to a cable or satellite set-top box (STB) via Bluetooth, that Bluetooth link can directly interfere with the HomeKit pairing process. Apple Community thread #250609472 documented this issue thoroughly.

The fix: Disconnect the STB from the Magic Remote before attempting HomeKit pairing. Go to Home Dashboard > Edit Inputs, and disconnect the STB's Smart Connection. Complete the HomeKit setup, then reconnect the STB afterward. HomeKit operates over Wi-Fi once paired, so the Bluetooth connection to the STB won't cause ongoing issues - it only interferes during the initial pairing handshake.

Fix 5: Long Input Name Causing HomeKit Failure

Here's another gem from the Apple Community forums that you won't find anywhere else. When your LG TV auto-detects a set-top box via Smart Connect, it assigns the input a long provider name - something like "Baltimore Something FIOS Verizon Services." This excessively long name causes HomeKit to either fail during pairing or mark the TV as "Unresponsive" afterward.

The fix: Rename the input to something short. Go to Home Dashboard > Edit > Rename Input and change it to something simple like "Cable" or "STB." Several users on lgwebos.com's HomeKit forums confirmed this immediately resolved their "Unresponsive" status. If you need help navigating input settings, how to change input on lg tv without remote explains alternate methods.

Fix 6: HomeKit Option Not Appearing in TV Settings

You've updated your firmware, verified your model is compatible, but the HomeKit option is nowhere to be found. This happens most often with region-locked settings.

Try this: Go to Settings > All Settings > General > System > Location and verify your region is set correctly. Some users with 2025 models report the HomeKit option disappeared after setting the region to a country where LG restricts certain features. Setting it to "US" or your actual country usually restores the option.

Also double-check that AirPlay is enabled first - on some webOS versions, the HomeKit setup option only appears after AirPlay has been toggled on.

Fix 7: TV Becomes "Unresponsive" After Working Initially

If your TV paired with HomeKit successfully but later shows "Unresponsive" in the Home app, the long input name bug (Fix 5) is the most common culprit. Check and rename any auto-detected inputs.

If that's not the issue, try removing the TV from HomeKit and re-adding it: Open the Home app, long-press the TV tile, tap the gear icon, scroll down to Remove Accessory, confirm, then repeat the pairing process from Step 4 in the setup section. To learn more about how to reset lg tv settings, that guide covers both soft and hard reset approaches.

Before resorting to removal, how to clear cache on lg tv is worth trying - cached data from a previous pairing attempt can occasionally cause conflicts.

Fix 8: Can't Control TV Remotely (Outside Home)

This isn't a TV problem - it's a Hub problem. Without an active Home Hub, HomeKit only works locally. Open the Home app and navigate to Home Settings > Home Hubs & Bridges. You should see a HomePod or Apple TV listed as "Connected."

If nothing is listed, you need to set up a Home Hub (see Section 5). If a Hub is listed but showing "Disconnected," verify that the Hub device is powered on, connected to Wi-Fi, and running the latest software.

Fix 9: AirPlay Works but HomeKit Doesn't

This catches people off guard because they assume enabling AirPlay automatically enables HomeKit. It doesn't. AirPlay and HomeKit are separate features requiring separate setup steps. You can stream content via AirPlay without ever configuring HomeKit.

Go back to AirPlay & HomeKit Settings on your TV and specifically complete the "Set Up HomeKit" step (Step 4 in our setup guide). Simply toggling AirPlay on isn't enough.

Fix 10: Factory Reset as a Last Resort

If you've worked through fixes 1–9 and nothing has resolved the issue, a factory reset clears everything and gives you a clean slate. Go to Settings > All Settings > General > Reset to Initial Settings.

A warning: This erases all TV settings, apps, accounts, and customizations. You'll need to set up the TV from scratch, re-download apps, re-enter Wi-Fi credentials, and then run through the HomeKit setup again. For detailed instructions, our how to factory reset lg tv guide walks through the complete process. If the standard factory reset option isn't accessible, how to hard reset lg tv covers alternative methods.

After the reset, update your firmware before attempting HomeKit pairing. If the TV feels sluggish after reset, why is my lg tv so slow addresses post-reset performance optimization.

For additional input-related issues like why does my lg tv say no signal after HomeKit setup, check that your HDMI inputs weren't renamed or reassigned during the process. And if the TV why does my lg tv keep turning off unexpectedly, power management settings may need adjustment alongside the HomeKit configuration.

For general HomeKit troubleshooting guidance, Apple Support's HomeKit troubleshooting page covers issues on the Apple side of the equation.

Frequently Asked Questions About LG TV and Apple HomeKit

Can I use HomeKit without a HomePod or Apple TV?

Yes - for basic local control. With no Home Hub, you can still turn your TV on and off, adjust volume, switch inputs, and use Siri commands while connected to the same Wi-Fi network. Remote access from outside your home and all automations require a Home Hub device (HomePod, HomePod mini, or Apple TV 4K). The HomePod mini at $99 is the most affordable way to unlock full functionality. If you want to explore more ways to how to control lg tv with phone, the LG ThinQ app works as a free remote control alternative, and you can also learn whether you can i use my phone as a tv remote lg for quick commands.

Does HomeKit work on LG TVs older than 2018?

No. HomeKit requires webOS 4.0 or later, which started with the 2018 model year. If you have a 2017 or older LG TV, your only option for HomeKit-like functionality is a third-party bridge like Homebridge running on a Raspberry Pi, which can expose limited controls to the Home app. To check whether your TV qualifies as is lg tv a smart tv, verify the model year - all LG Smart TVs from 2018 onward are compatible. If you're wondering how long does an lg tv last and whether it's worth upgrading an older model, newer LG TVs offer dramatically better smart home integration.

What's the difference between AirPlay and HomeKit on LG TV?

AirPlay 2 is a streaming protocol - it sends video, audio, and screen mirroring content from your iPhone, iPad, or Mac to the TV. HomeKit is a smart home control framework - it lets you power the TV on and off, adjust volume, switch inputs, and include the TV in scenes and automations through the Home app and Siri.

You need both enabled for the complete experience, but they serve different purposes. Check out does lg tv have airplay for a deeper look at AirPlay's capabilities on LG TVs.

Does HomeKit work when the LG TV is off?

HomeKit can power your LG TV on from standby - but only if "Turn on via Wi-Fi" is enabled in Settings > General > Additional Settings. Without this setting, the TV drops its Wi-Fi connection when powered off and shows "No Response" in the Home app. An Ethernet connection also solves this, as wired connections don't disconnect in standby mode.

Can I control multiple LG TVs with HomeKit?

Absolutely. Each TV appears as a separate accessory in the Home app. Repeat the setup process for each TV and assign them to different rooms with unique names (e.g., "Bedroom TV" and "Living Room TV"). Siri uses these names to differentiate commands.

Can I use HomeKit and Alexa on the same LG TV?

Yes. LG TVs support HomeKit, Amazon Alexa, and Google Assistant simultaneously without conflict. Each platform operates through its own integration - HomeKit through the Apple Home app, Alexa through the LG ThinQ app or Echo devices, and Google through the Google Home app. You can run all three and use whichever is most convenient in the moment. If you're exploring beyond the Apple ecosystem, does lg tv have chromecast covers Google Cast support, and for a broader comparison of the platforms, our is lg tv better than samsung guide examines smart home ecosystem differences between the two brands. You might also want to confirm does lg tv have bluetooth connectivity for pairing with additional wireless accessories.

Take Full Control of Your LG TV with Apple HomeKit

You've covered a lot of ground. By working through this guide, you've verified your LG TV's compatibility, completed the HomeKit setup, learned every Siri voice command available, built automations that make your TV part of a smarter home, and - if anything went wrong - have a 10-fix troubleshooting reference tested against real-world issues from hundreds of users.

The single most important takeaway: enable "Turn on via Wi-Fi" in your TV settings. It solves the majority of "No Response" complaints and makes the entire HomeKit experience feel polished rather than frustrating.

HomeKit on LG TVs gets better with each webOS update, and the 2026 models with Matter and Thread support promise even deeper smart home integration. We'll update this guide as new webOS versions and models are released - bookmark it for reference.

Ready to explore more? Learn how to screen share on lg tv for wireless presentation and mirroring options, or check out how to add apps to lg smart tv to customize your webOS experience even further.

This guide was last updated and tested in March 2026. All setup steps, Siri commands, and troubleshooting fixes have been verified on current hardware and software.